ARGOX PRINTER SETTINGS

Post Reply
gwtiltman
Site Admin
Posts: 668
Joined: Thu Dec 26, 2013 12:02 pm
Location: Northwold, Gauteng

ARGOX PRINTER SETTINGS

Post by gwtiltman » Fri Dec 27, 2013 4:39 pm

When installing the argox printer please adhere to this routine:
1) Go into PRINTERS & FAXES
2) RIGHT CLICK and select Server Properties or select FILE -> Server Properties
3) Tick CREATE NEW FORM
4) In form name Type in a NAME for the Form you are creating IE: 1 Crus
5) In FORM DESCRIPTION (located at the bottom of the screen) ensure: UNIT is in METRIC (select METRIC) 'cm' Change WIDTH to: 5.5 Change HEIGHT to: 4.5 Leave the rest ALONE do not change anything else
6) Click on SAVE FORM
7) Right Click on the Argox Printer and select Properties
8) Ensure you follow the settings below Label Dr. 200 (4 inch model) Device Settings T/T Media with gap - 'New Label' D/T Media with gap - 'New Label' Printing Pref Orientation - Landscape Paper Source - D/T Media with gap Advanced Paper Size - Label 'New Label' D___Copy Count - 1 Copy D___Resolution - 203 dots per inch D___Halftone Colour adjustment... Media - Tear Off Enabled Speed - 4.0 ips Print Quality - Darkness 8 D___Metafile Spooling - On Now when Printing Barcodes, the barcode will print out and you can tear off the label. When printing the next barcode, the paper will pull back so that no barcodes are wasted

Post Reply